Secure Credit Card Processing

 Home » Parts » Lortone Tumbler Parts » Lortone QT6, QT66 and QT12 Parts

Lortone QT6, QT66 and QT12 Rock Tumbler Parts

QT6, QT66 and QT12 rock tumbler parts
We sell replacement motors, bearings, barrels, barrel parts, gaskets and belts.
Rock Tumbler Supplies
Fee mining collecting map
Rock tumbler grit Rock tumbler polish Rock tumbler rough Rock tumbling media Rock tumbler grit Rock tumbler rough Rock tumbling media Rock Tumbling Supplies

Belt for Lortone QT models

Lortone QT6, QT12 and QT66 Tumbler Belt


Only $8.99
This belt fits all of Lortone's QT series rock tumblers. Replacing the belt on a QT model tumbler is easy to do. Simply remove the safety cover and replace the old belt with a new one. Belts are the most commonly replaced part on a rock tumbler.
Rubber feet

Rubber Feet for Lortone Bases


Four for $3.99
A set of four rubber feet. These feet will work on the Lortone QT6, QT66 and QT12 tumblers.
Lortone QT model tumbler bearings

Lortone Model QT6, QT66 & QT12 Bearings


Four for $16.99
This set of bearings will work on any Lortone QT rock tumbler. This includes the QT6, QT66 and QT12 tumblers. They are pretty easy to replace. If you only need to replace 1 or 2 bearings hold on to the extra ones for future use.
All QT Models Shaft Retainer Clips

Shaft Retainer Clips for All QT Model Tumbler Shafts


Only $2.99
Set of four shaft retainer clips designed for Lortone models QT6, QT66 and QT12.
Lortone QT6 Drive Shaft

Lortone Model QT6 Drive Shaft


Only $10.99
This replacement drive shaft for the QT6 tumbler comes with the rubber sleeve on it. The drive pulley and retainer clips are NOT included. If you can't reuse your old clips you can get new ones above.
Lortone QT6 Idler Shaft

Lortone QT6 Idler Shaft


Only $10.99
The QT6 idler shaft includes the rubber sleeve that helps grip and turn the barrel. Retainer clips do NOT come with the idler shaft. If you can not use the old clips you can purchase new ones above.
Lortone QT66 and QT12 Drive Shaft

Lortone QT66 and QT12 Drive Shaft


Only $12.99
This drive shaft comes with the rubber already on it and is designed for the Lortone QT66 and QT12 rock tumblers. New retainer clips, if needed, can be purchased above.
Lortone QT66 and QT12 Drive Shaft

Lortone QT66 and QT12 Idler Shaft


Only $12.99
Designed for use on Lortone's QT12 and QT66 rock tumblers, this drive shaft comes with the rubber sleeve on it. New retainer clips, if needed, can be purchased above.
All QT Models Barrel Guide

Barrel Guide for All QT Models


Only $6.99
This barrel guide comes with the metal plate, nut, bolt and washer. This piece fits all of the following models of Lortone tumblers: QT6, QT66 and QT12.
Lortone lid nut and washer

Lortone QT Tumblers Barrel Nut and Washer


Only $4.99
This is the knurled nut used to tighten the lid on Lortone hobbyist tumbler barrels. Fits all Lortone rock tumbler barrels that we sell.

Does NOT fit Tumble-Bee barrel lids.
Lortone 6lb and 12lb barrel drum boot gasket

Lortone 6lb and 12lb Barrel Boot Gasket


Only $10.99
This rubber boot gasket fits the barrels on the QT6, QT66 and QT12 Lortone rock tumblers. It is an easy part to replace so you can get back to tumbling your rough.
Lortone 6lb and 12lb barrel drum boot gasket

Lortone 6lb and 12lb Barrel Inner Lid with Stud


Only $10.99
This is the metal lis with threaded stud for the barrels on Lortone Model QT6, QT66 and QT12 tumblers.
Lortone 6lb and 12lb outer lid

Lortone 6lb and 12lb Barrel Outer Lid


Only $11.99
This is metal outer lid completes the watertight seal on Lortone's 6-pound and 12-pound rock tumbler barrels.
Lortone QT6 and 66 tumbler barrel

Lortone 6-Pound Barrel


Only $74.99
This 6-pound barrel fits the Lortone Model QT6 and QT66 rock tumblers. It is made of soft rubber and supplied with a two-piece metal lid, rubber lid liner, washer and plastic nut. TIP: Get an extra barrel and dedicate it to the polishing step. This significantly reduces the possibility of grit contamination.

Barrel Dimensions in Inches
  Height Diameter
Inside (min) 3 5/8 6 3/4
Outside (max) 4 1/2 7 3/4
Outside height does NOT include 5/8 inch for the nut and washer.

Lortone 12lb tumbler barrel

Lortone QT12 12-Pound Barrel


Only $89.99
A complete Lortone QT 12 large capacity rock tumbler barrel. It includes the soft rubber barrel, two-piece metal lid, rubber lid liner, washer and plastic nut. This barrel will also fit on the QT66 base.

Barrel Dimensions in Inches
  Height Diameter
Inside (min) 7 6 3/4
Outside (max) 8 3/8 7 3/4
Outside height does NOT include 5/8 inch for the nut and washer.

Lortone model QT12, QT6 and QT66 motor

QT6, QT66 and QT12 Tumbler Motor


Only $99.99
Replacing a Lortone QT motor is easy to do. Remove the belt guard and take off the belt. Undo the nuts holding the old motor on and replace it with your new motor. Remove the pulley from the old motor and put it on the new motor. Place the belt on the pulleys and put the belt cover back on and you're ready to tumble again.

Rock Tumbler Supplies
Fee mining collecting map
Rock tumbler grit Rock tumbler polish Rock tumbler rough Rock tumbling media Rock tumbler grit Rock tumbler rough Rock tumbling media Rock Tumbling Supplies